Exam : Ericsson ED0-001
Title : Ericsson MSC/BSC Competence Exam

1. What MOs can be tested with a command-ordered equipment test?
A. TG,TRXC,TX,RX and TS
B. CF,IS,TF,TRXC,TX,RX and TS
C. TG,CF,IS,TF,TRXC,RX,TX and TS
D. TG,TS,RX and TX
Answer:B

2. A rolling database of active and previous hardware alarms can be viewed using________?
A. ATR
B. ALB
C. ALV
D. ASM
Answer:B

3. Which of the following commands is used to define a channel group for a cell?
A. RLDEI
B. RLDGI
C. RLDEC
D. RLDSI
Answer:B

4. Which of the following is the correct command sequence for a CP Fault?
A. REPRI,REMRI,RECRI
B. REPCI,REMCI,RECCI
C. RECCI,REPCI,REMCI
D. GSTEI,NTTEI,TCTDI
Answer:B

5. Which of the following commands is used to print the process control in service performance log data?
A. PRINTPROCESS
B. ALIST
C. ISPPRINT
D. ALOGLIST
Answer:C

6. Which of the following commands is used to make a copy of backup file RELFSW1 to the oldest file in the SFR group?
A. SYTUC
B. SYNIC
C. SYSFT
D. SYFSC
Answer:C

7. Which file is used for automatic data dumps and automatic system reloads?
A. RELFSW0
B. RELFSW1
C. .RELFSW2
D. RELFSW100
Answer:A

8. Which of the following commands is used to add a device to the route?
A. EXDRI
B. EXDAI
C. EXDRP
D. EXDRE
Answer:A

PassQuick ed0-001 Practice Exams Description

Exam Number/Code: ed0-001

Exam Name: ericsson msc/bsc competence exam

VUE Code: ed0-001

vendor:Ericsson

Exam Language(s): English

Certification: Ericsson Certification practice test

Preparing for the ed0-001 exam? Searching ed0-001 Braindumps, Ericsson ed0-001 Test Questions, ed0-001 Practice Exam, ed0-001 Dumps? PassQuick ed0-001 is written to coincide with the real test by the experienced IT experts and specialists. With the complete collection of PassQuick Questions and Answers, PassQuick ed0-001 Dumps is high enough to help the candidates to easy pass this exam easily without any other study materials and no need to attend the expensive training class.

Ericsson ed0-001 Exam

PassQuick ed0-001 Practice Exams Description

Exam Number/Code: ed0-001

Exam Name: ericsson msc/bsc competence exam

VUE Code: ed0-001

vendor:Ericsson

Exam Language(s): English

Certification: Ericsson Certification practice test

Preparing for the ed0-001 exam? Searching ed0-001 Braindumps, Ericsson ed0-001 Test Questions, ed0-001 Practice Exam, ed0-001 Dumps? PassQuick ed0-001 is written to coincide with the real test by the experienced IT experts and specialists. With the complete collection of PassQuick Questions and Answers, PassQuick ed0-001 is high enough to help the candidates to easy pass this exam easily without any other study materials and no need to attend the expensive training class.

Free PassQuick ed0-001 Practice Engine Demo Download

Download Ericsson ed0-001 Pdf Exam

　
　
Exam : Ericsson ED0-001
Title : Ericsson MSC/BSC Competence Exam

1. Which of the following commands is used to add a device to the route?
A. EXDRI
B. EXDAI
C. EXDRP
D. EXDRE
Answer:A

2. When SAE individuals are increased or decreased,Program Store(PS) is affected?
A. True
B. False
Answer:B

3. What MOs can be tested with a command-ordered equipment test?
A. TG,TRXC,TX,RX and TS
B. CF,IS,TF,TRXC,TX,RX and TS
C. TG,CF,IS,TF,TRXC,RX,TX and TS
D. TG,TS,RX and TX
Answer:B

4. OMS and STS measurement jobs for use by the NWS are created with?
A. SDM
B. SGW
C. PMR
D. SMIA
Answer:D

5. Which of the following commands is used to make a copy of backup file RELFSW1 to the oldest file in the SFR group?
A. SYTUC
B. SYNIC
C. SYSFT
D. SYFSC
Answer:C

6. Which of the following commands is used to print the process control in service performance log data?
A. PRINTPROCESS
B. ALIST
C. ISPPRINT
D. ALOGLIST
Answer:C

7. Which of the following commands is used to define a channel group for a cell?
A. RLDEI
B. RLDGI
C. RLDEC
D. RLDSI
Answer:B

8. Software Error Information can be retrieved by command_____?
A. PTRIP
B. SYRIP
C. SYDIP
D. SYRSP
Answer:B

9. Which of the following is the correct command sequence for a CP Fault?
A. REPRI,REMRI,RECRI
B. REPCI,REMCI,RECCI
C. RECCI,REPCI,REMCI
D. GSTEI,NTTEI,TCTDI
Answer:B

10. Which file is used for automatic data dumps and automatic system reloads?
A. RELFSW0
B. RELFSW1
C. .RELFSW2
D. RELFSW100
Answer:A

11. Which of the following pairs of commands is used to replace the software version for the Managed Objects?
A. RXEST and RXPLI
B. RXMOI and RXMSC
C. RXMSC and RXPLE
D. RXMSC and RXPLI
Answer:D

12. A rolling database of active and previous hardware alarms can be viewed using________?
A. ATR
B. ALB
C. ALV
D. ASM
Answer:B

Recommended Training about Ericsson ed0-001 testing Fromat

The following courses are the recommended training for ed0-001 PDF Fromat.

ed0-001 Q & A with Explanations

ed0-001 Audio video download

ed0-001 Study Guide materials

ed0-001 Preparation Labs

ed0-001 paper books

ed0-001 rapidshare 4shared sadikhov links

ed0-001 torrent notes

ed0-001 TestInside

ed0-001 sample print pdf version

Why do you Choose PassQuick ed0-001 Test Engine?

Quality and Value for the ed0-001 Exam

PassQuick Practice Exams for Ericsson Certification ed0-001 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass ed0-001 Exam

If you prepare for ed0-001 exam using our PassQuick exams, we guarantee your success in the first attempt. If you do not pass the ed0-001 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

　
　
Exam : Ericsson ED0-002
Title : Ericsson BTS Competence Exam

1. How many T1s can one DXU-21 support?
A. 1
B. 2
C. 3
D. 4
Answer: D

2. What common LED indicators are in the CDU, PSU, BFU, and dTRU?
A. RBS Fault
B. Operational
C. Fault
D. B and C
Answer: D

3. In OMT, what view shows the RUs installed in the GSM cabinet?
A. System View
B. Radio view
C. MO View
D. Cabinet View
Answer: D

4. Bends to RF cables (coaxial) should be a minimum of ten (10) times the cable diameter.
A. RLSTC:CELL=12002B, STATE=HALTED;
B. RLSTC:SITE=12002,STATE=HALTED;
C. RLSTP:CELL=12002B, HALTED;
D. RLSTP:CELL=12002B, STATE=HALTED;
Answer: A

5. What could a flashing green LED indicate in an MRU?
A. Fault is localized
B. Wait, activity in progress
C. Battery Power depleted
D. None of the above
Answer: B

6. What is the proper resistance of an ESD wrist strap?
A. 1 ohm (O)
B. 1 Mega ohm (MO)
C. 10 O
D. 1 MO
Answer: B

7. An ESD wrist strap must always be used when handling or installing _____.
A. a DXU
B. printed circuit boards
C. TRU/dTRU
D. All of the above
Answer: D

8. The abbreviation "VSWR" stands for___.
A. Variable Signal Wave Radio
B. Voltage Strength Wire Ratio
C. Very Strong Wave Radio
D. Voltage Standing Wave Ratio
Answer: D

PassQuick ed0-002 Practice Exams Description

Exam Number/Code: ed0-002

Exam Name: ericsson bts competence exam

VUE Code: ed0-002

vendor:Ericsson

Exam Language(s): English

Certification: Ericsson Certification practice test

Preparing for the ed0-002 exam? Searching ed0-002 Braindumps, Ericsson ed0-002 Test Questions, ed0-002 Practice Exam, ed0-002 Dumps? PassQuick ed0-002 is written to coincide with the real test by the experienced IT experts and specialists. With the complete collection of PassQuick Questions and Answers, PassQuick ed0-002 Dumps is high enough to help the candidates to easy pass this exam easily without any other study materials and no need to attend the expensive training class.

Ericsson ed0-002 Exam

PassQuick ed0-002 Practice Exams Description

Exam Number/Code: ed0-002

Exam Name: ericsson bts competence exam

VUE Code: ed0-002

vendor:Ericsson

Exam Language(s): English

Certification: Ericsson Certification practice test

Preparing for the ed0-002 exam? Searching ed0-002 Braindumps, Ericsson ed0-002 Test Questions, ed0-002 Practice Exam, ed0-002 Dumps? PassQuick ed0-002 is written to coincide with the real test by the experienced IT experts and specialists. With the complete collection of PassQuick Questions and Answers, PassQuick ed0-002 is high enough to help the candidates to easy pass this exam easily without any other study materials and no need to attend the expensive training class.

Free PassQuick ed0-002 Practice Engine Demo Download

Download Ericsson ed0-002 Pdf Exam

　
　
Exam : Ericsson ED0-002
Title : Ericsson BTS Competence Exam

1. Bends to RF cables (coaxial) should be a minimum of ten (10) times the cable diameter.
A. RLSTC:CELL=12002B, STATE=HALTED;
B. RLSTC:SITE=12002,STATE=HALTED;
C. RLSTP:CELL=12002B, HALTED;
D. RLSTP:CELL=12002B, STATE=HALTED;
Answer: A

2. The abbreviation "VSWR" stands for___.
A. Variable Signal Wave Radio
B. Voltage Strength Wire Ratio
C. Very Strong Wave Radio
D. Voltage Standing Wave Ratio
Answer: D

3. The abbreviation "COD" stands for_____.
A. Command Document
B. Command Description
C. Command On Demand
D. None of the above
Answer: B

4. How many T1s can one DXU-21 support?
A. 1
B. 2
C. 3
D. 4
Answer: D

5. What is the proper resistance of an ESD wrist strap?
A. 1 ohm (O)
B. 1 Mega ohm (MO)
C. 10 O
D. 1 MO
Answer: B

6. An ESD wrist strap must always be used when handling or installing _____.
A. a DXU
B. printed circuit boards
C. TRU/dTRU
D. All of the above
Answer: D

7. What type of RU is a fan?
A. MCRU
B. DDMRU
C. Subordinate
D. Passive
Answer: D

8. What common LED indicators are in the CDU, PSU, BFU, and dTRU?
A. RBS Fault
B. Operational
C. Fault
D. B and C
Answer: D

9. In OMT, what view shows the RUs installed in the GSM cabinet?
A. System View
B. Radio view
C. MO View
D. Cabinet View
Answer: D

10. In OMT, the System View shows:
A. BSC, PCM link, Alarm Inlets, RBS, OMT, ISP, and ESB
B. BTS, PCM link, Alarm Inlets, RBS, OMT, IDB, and ESI
C. BSC, PCM link, Alarm Inlets, RBS, OMT, IDB, and ETS
D. BSC, PCM link, Alarm Inlets, RBS, OMT, IDB, and ESB
Answer: D

11. What could a flashing green LED indicate in an MRU?
A. Fault is localized
B. Wait, activity in progress
C. Battery Power depleted
D. None of the above
Answer: B

12. If VSWR supervision is disabled in the IDB, an alarm is sent to the BSC if the level reaches_____.
A. 1.8
B. 2.2
C. 2.8
D. The alarm is not sent to the BSC
Answer: D

Recommended Training about Ericsson ed0-002 testing Fromat

The following courses are the recommended training for ed0-002 PDF Fromat.

ed0-002 Q & A with Explanations

ed0-002 Audio video download

ed0-002 Study Guide materials

ed0-002 Preparation Labs

ed0-002 paper books

ed0-002 rapidshare 4shared sadikhov links

ed0-002 torrent notes

ed0-002 TestInside

ed0-002 sample print pdf version

Why do you Choose PassQuick ed0-002 Test Engine?

Quality and Value for the ed0-002 Exam

PassQuick Practice Exams for Ericsson Certification ed0-002 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass ed0-002 Exam

If you prepare for ed0-002 exam using our PassQuick exams, we guarantee your success in the first attempt. If you do not pass the ed0-002 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.